The life span of this crushing machine bounds up with procedure and also maintenance, if you do it appropriately and prompt, it will be an expert about two decades. Its installation actions are the crucial treatment prior to the equipment being and also running operated. The first point we must recognize as well as keep in our mind is its functioning principle.

The movable cone as well as dealt with cone relocations through the continual application of the different materials left near the broken duty in the making use of procedure before, to be fairly exact for devices installment, installment of equipment, the devices rack is to maintain the different elements inside the tool key to security, and also as a result the setup of equipment in stringent accordance with the standards, not the setup as well as appointing deviations create the device to regular procedure and also serious damages to equipment failure, influencing the smooth as well as its manufacturing capacity.

When installing the shelf of cone crusher price list crusher, the shelf should be maintained the straight and also upright nature, if needed, utilize the straight gauge on the ring base. Use vertical netsuke to check the vertical as well as straight centerline. The base can be changed the degree by utilizing wedge modification, after modification to re-tighten the support bolts and the strong grouting.

After second grouting and the cement layer to be solidified, get the wedge block under the base of the cone crusher, and also fill up the gap of the change wedge with concrete, re-check and also determine the vertical and also straight performance, preventing to create single exposure of the copper sleeve on the base of cone crusher, the eccentric produce deterioration, as well as influence the security of the device seal. When cone crusher installation of rack, to make certain the accuracy as well as stability of the devices installment, this can make the last production to take full advantage of performance.

If you utilize it for the very first time, the adhering to points must be born in mind.

1. It has been debugged before leaving manufacturing facility, however after you establish it up, simply practice it and inspect whether the equipment failing leaves or otherwise.

2. It is forbidden to begin it with load; all the rocks in crushing chamber must be cleansed. Check the discharging port size; is it the ideal dimension you intend to have? If not, simply change it.

3. Cable television as well as any kind of additional cords need to be under the normal problems.

4. It will not begin when the oil temperature is under 20.